KBRASTU15 Nissan remote fob programming
By Phoebe | 09 January 2018 | 1 Comments

Programming Instructions for KBRASTU15 Nissan remote fob

1, Enter vehicle close driver's door. Lock all doors using the lock button on the driver side.

2. Insert key into the ignition (do not turn) remove key, insert and remove key rapidly at least six times until the hazard lamps flash when key is removed from the ignition

3. When the hazard lights flash this signals the vehicle has entered into programming mode. IF the hazards did not flash you are performing the procure either to quickly or slow.

4 Insert key into ignition and turn it to the ACC position.

5. Press the lock button once on the remote being programmed. Hazard lights will flash signaling remote programmed successfully.

6.If there are any additional remotes include original remote unlock then lock doors using the driver's side lock/unlock button.** Repeat just this step for each additional remote being programmed.** (Do not start from step 1 for each additional remote)

7. Turn key back to the off position to exit programming mode.

8. Exit vehicle test all remotes


Recently Reviews

READ MORE

Leave a Reply

Your email address will not be published.Required fields are marked. *
name
E-mail
Content
Verification code
POPULAR BLOG