164-R8091 Smart key 4 button 315mhz 434mhz for Ford Edge Explorer Flex Taurus M3N5WY8609
Welcome to register an account and place the order on our website.
Your position: Home / Sort by Car Brand / Ford

164-R8091 Smart key 4 button 315mhz 434mhz for Ford Edge Explorer Flex Taurus M3N5WY8609

K9148002
This is aftermarket key remote.
Price:
$23.90
(33% OFF)
Wholesale:
10-19
$23.20
20+
$22.39
    Please select the information you wantX
  • Frequency:
    315mhz
    434mhz
Quantity:
-
+
(1000 available)
  • Description
  • Programming Instructions
  • Reviews

164-R8091 Smart key 4 button 315mhz 434mhz for Ford Edge Explorer M3N5WY8609
FCC ID :M3N5WY8609
IC:7812A-5WY8609

Frequency:315mhz 434mhz

work on:

11 12 13 14 15 Ford Edge
15 16 17 Ford Expedion
11 12 13 14 15 Ford Explorer
13 14 15 16 17 18 19 Ford Flex

 

 

 

1. Enter the vehicle, close, and unlock all doors using the power unlock switch on the driver’s door.
2. Insert the key into the ignition.
3. Within ten (10) seconds, switch the key as far to the ON position as it will go without starting; then back to OFF, perform this step eight (8) times ending in the ON position on the eighth (8th) time. Each cycle ON to OFF will count as one (1).
If the door locks appear to be cycling after the fourth (4th) ON to OFF cycle, restart the procedure from STEP 1 and only turn the key four (4) times in this STEP, ending in the ON position the fourth (4th) time.
 
At this point the vehicle door locks should automatically lock and unlock, indicating that the programming mode has been activated. If the door locks do not cycle automatically then the programming procedure has failed and you need to restart the procedure from STEP 1.
 
4. Within seven (7) seconds, using any remote, (we recommend first programming original remotes if you have one) press and release the LOCK button. The vehicle doors will automatically lock and unlock indicating the new remote has been accepted.
5. Repeat STEP 4 for all remaining remotes you wish to program (you can program up to four (4) remotes total).
6. Once you have programmed all your remotes, exit the programming mode by turning the key off and removing it from the ignition.
7. Test all remotes to ensure they are functioning. If any did not program, restart the programming procedure from STEP 1 and switch the order in which you are programming the remotes.
Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Links:Kitchen waste processor
Message Us